EL1032T Series

Industrial 10/100BASE-TX to 100BASE-FX Media Converter with PoE/PSE
PoE 30W
EL1032T Series Industrial 10/100BASE-TX to 100BASE-FX Media Converter with PoE/PSE
EL1032T Series Industrial 10/100BASE-TX to 100BASE-FX Media Converter with PoE/PSE
PoE power budget of 30W
Link Fault Pass Through (LFPT)
DIN-rail, panel, or rack mounting

The EL1032T Series provides media conversion between 10/100BASE-T(X) and 100BASE-FX Fiber. Through DIP switch selection, Link-Fault-Pass-Through (LFPT) function can be active or disabled. EL1032T supports IEEE 802.3at PoE/PSE standard and can transmit power and data over one RJ45 cable. The EL1032T's industrial design features high shock/vibration resistance, electrical noise immunity and a wide operating temperature range from -10 to 60°C. EL1032T is the ideal media converter for industrial environments.

EtherWAN — "When Connectivity is Crucial."

Power over Ethernet

» Supports IEEE802.3at PoE/PSE standard and IEEE802.3af PoE/PSE compatible

Dual Power Interfaces

» Supports both terminal block and DC jack for power input selections

Industrial operating temperature range

» From -10°C to 60°C, wide operating temperature is suitable for outdoor cabinet installation



  • • IEEE 802.3 10BASE-T
  • • IEEE 802.3u 100BASE-TX/FX
  • • IEEE 802.3af/at PoE/PSE

Forward and Filtering Rate
  • • 14,880pps for 10Mbps
  • • 148,810pps for 100Mbps

Packet Buffer Memory
  • • 228Kb

Processing Type
  • • Store-and-Forward
  • • Auto Negotiation
  • • Half-duplex back-pressure and IEEE 802.3x full-duplex flow control
  • • Auto MDI/MDIX


Input Voltage

  • • 48-57VDC

Power Consumption
  • • Device: Max. 3.6W (without PoE)
  • • PoE power budget: 30W Max. (depends on power input)

PoE Power Output
  • • IEEE 802.3at: up to 30W/port, 50-57VDC, 500mA Max.

  • • Overload current protection
  • • Reverse polarity protection



  • • Aluminum Case

  • • 70 x 110 x 30mm (W x D x H)
      (2.76" x 4.33" x 1.18")

  • • 0.25Kg (0.55lb.)

  • • DIN-Rail (top hat type 35mm), Panel, or Wall mounting


Ethernet Port

  • • 10/100BASE-TX: 1 port
  • • 100BASE-FX: 1 port

LED Indicators
  • • Per Unit: Power
  • • Per 10/100TX Port: Link/ACT, full-duplex/collision
  • • Per 100FX Port: Link/ACT
  • • PoE: PD connect/PD disconnect


Operating Temperature

  • • -10 to 60°C (14 to 140°F)
      Tested @ -20 to 70°C (-4 to 158°F)

Storage Temperature
  • • -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
  • • 5% to 95% (non-condensing)

Regulatory Approvals


  • • Manufactured in an ISO 9001 facility

  • FCC Part 15B Class A
  • EN 61000-6-4
  • EN 55022

  • EN 61000-6-2
  • • EN 61000-4-2 (ESD Standards)
  • • EN 61000-4-3 (Radiated RFI Standards)
  • • EN 61000-4-4 (Burst Standards)
  • • EN 61000-4-5 (Surge Standards)
  • • EN 61000-4-6 (Induced RFI Standards)
  • • EN 61000-4-8 (Magnetic Field Standards)

Environmental Test Compliance
  • IEC 60068-2-6 Fc (Vibration Resistance)
  • IEC 60068-2-27 Ea (Shock)
  • FED STD 101C Method5007.1 (Free fall w/package)


EL1032T-X0B10/100BASE-TX to 100BASE-FX Industrial Media Converter with IEEE 802.3af 15.4W and IEEE 802.3at 30W PoE/PSE

* DIN-Rail mounting kit included.

100FX Fiber Options (X)

1Multi Mode (SC)
2Multi Mode (ST)
ASingle Mode (SC) - 20Km (1310nm)
BSingle Mode (SC) - 40Km (1310nm)
HSingle Mode (ST) - 20Km (1310nm)
6Multi Mode (SC) WDM-TX: 1310nm/RX: 1550nm-2Km
7Multi Mode (SC) WDM-TX: 1550nm/RX: 1310nm-2Km
8Multi Mode (SC) WDM-TX: 1310nm/RX: 1550nm-5Km
9Multi Mode (SC) WDM-TX: 1550nm/RX: 1310nm-5Km
PSingle Mode (SC) WDM-TX: 1310nm/RX: 1550nm-20Km
QSingle Mode (SC) WDM-TX: 1550nm/RX: 1310nm-20Km
RSingle Mode (SC) WDM-TX: 1310nm/RX: 1550nm-40Km
SSingle Mode (SC) WDM-TX: 1550nm/RX: 1310nm-40Km

* More 100FX Fiber options also available upon request.

Optional Accessories

EDR-75-4875W/1.6A DIN-Rail 48VDC Industrial Power Supply
EXGS-120A-48Power Supply 120W 48VDC with Latch