Back to top

EL8000 Series

Hardened 1000BASE-TX to 1000BASE-SX/LX/BX/SFP Media Converter

SFP
Wide Temperature
UL 61010
EL8000 Series Hardened 1000BASE-TX to 1000BASE-SX/LX/BX/SFP Media Converter
EL8000 Series Hardened 1000BASE-TX to 1000BASE-SX/LX/BX/SFP Media Converter
EL8000 Series Hardened 1000BASE-TX to 1000BASE-SX/LX/BX/SFP Media Converter
EL8000 Series Hardened 1000BASE-TX to 1000BASE-SX/LX/BX/SFP Media Converter
Power failure alarm and configurable link status monitoring via relay output
LFPT configurable for site-to-site or single point management
EL8000 Series Hardened 1000BASE-TX to 1000BASE-SX/LX/BX/SFP Media Converter
EL8000 Series Hardened 1000BASE-TX to 1000BASE-SX/LX/BX/SFP Media Converter
EL8000 Series Hardened 1000BASE-TX to 1000BASE-SX/LX/BX/SFP Media Converter
EL8000 Series Hardened 1000BASE-TX to 1000BASE-SX/LX/BX/SFP Media Converter
Overview
Spotlight
Specifications
Application
Dimensions
Ordering Info

The EL8000 Series provides media conversion between 1000BASE-TX and 1000BASE-SX/LX/BX/SFP Fiber. Built specifically for mission critical applications in harsh environments, the EL8000's hardened design features high shock & vibration resistance, electrical noise immunity, wide operating temperature range from -40 to 75°C, and aluminum housing. With two power inputs, link down alarming, Link-Fault-Pass-Through and a wide range of fiber connectivity options, the EL8000 is the ideal media converter for environments where connectivity is crucial.

EtherWAN — "When Connectivity is Crucial."

Full Gigabit bandwidth and Jumbo frames

» 1000BASE-T and 1000BASE-SX/LX/BX/SFP Ethernet transmission conversion
» 1000Mbps Full duplex and full wire-speed forwarding rate
» Jumbo frames up to 10K bytes to increase throughput and transmission efficiency

Port Failure Alarm

» Relay alarm configured by DIP switch to notify users when power fails or link is down

Hardened Grade

» Supports -40 to 75°C (-40 to 167°F) operating temperature
» Redundant power inputs on terminal block connector
» Supports DIN-Rail mounting

Link-Fault-Pass-Through (LFPT)

» Provides constant monitoring of the links connected to the media converters
» If a copper or a fiber link fails, the media converter will pass the fail state on throughout the link, disabling the fiber link and the copper link on the opposite end

Technology

Standards

  • • IEEE 802.3ab 1000BASE-T
  • • IEEE 802.3z 1000BASE-SX/1000BASE-LX

Forward and Filtering Rate
  • • 148,810pps for 1000Mbps

Processing Type
  • • Auto Negotiation
  • • Auto MDI/MDIX


Power

Input Voltage

  • • 12 to 48VDC

Power Consumption
Protection
  • • Overload current protection
  • • Reverse polarity protection


Mechanical

Casing

  • • Aluminum Case
  • • IP30

Dimensions
  • • 35.8 x 90 x 100mm (W x D x H)
      (1.41" x 3.54" x 3.94")

Weight
  • • 0.23Kg (0.51lbs.)

Installation
  • • DIN-Rail


Interface

Ethernet Port

  • • 1000BASE-T: 1 port
  • • 1000BASE-SX/LX/SFP: 1 port

LED Indicators
  • • Per Unit: Power 1, Power 2, Fault, LFPT
  • • Per Port: LNK/Activity

DIP Switch
  • • No.1: LFPT On/Off
  • • No.2: Alarm for copper port On/Off
  • • No.3: Alarm for fiber port On/Off
  • • No.4: Auto-negotiation for fiber port On/Off

Alarm Contact


Environment

Operating Temperature

  • • -40 to 75°C (-40 to 167°F)

Storage Temperature
  • • -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
  • • 5% to 95% (non-condensing)


Regulatory Approvals

ISO

  • • Manufactured in an ISO 9001 facility

Safety
  • UL 61010

EMI
  • FCC Part 15B Class A
  • VCCI Class A
  • EN 55032
  • EN 61000-3-2
  • EN 61000-3-3
  • EN 61000-6-3

EMS
  • EN 61000-6-2
    • • EN 61000-4-2 (ESD Standards)
    • • EN 61000-4-3 (Radiated RFI Standards)
    • • EN 61000-4-4 (Burst Standards)
    • • EN 61000-4-5 (Surge Standards)
    • • EN 61000-4-6 (Induced RFI Standards)
    • • EN 61000-4-8 (Magnetic Field Standards)

Environmental Test Compliance
  • IEC 60068-2-6 Fc (Vibration Resistance)
  • IEC 60068-2-27 Ea (Shock)
  • FED STD 101C Method 5007.1 (Free fall w/package)


Model

EL8000-X1E 1000BASE-TX to 1000BASE-SX/LX/BX/SFP Hardened Media Converter

Gigabit Fiber Options (X)

3 1000BASE-SX (SC) - 550m
4 1000BASE-SX (SC) - 2Km
5 1000BASE-SX (ST) - 550m
A 1000BASE-LX (SC) - 10Km
B 1000BASE-LX (SC) - 20Km
R 1000BASE-BX (SC) WDM -TX: 1310nm/RX: 1550nm-20Km
S 1000BASE-BX (SC) WDM -TX: 1550nm/RX: 1310nm-20Km
V 1000BASE SFP

* More Gigabit options are also available upon request.


Overview

The EL8000 Series provides media conversion between 1000BASE-TX and 1000BASE-SX/LX/BX/SFP Fiber. Built specifically for mission critical applications in harsh environments, the EL8000's hardened design features high shock & vibration resistance, electrical noise immunity, wide operating temperature range from -40 to 75°C, and aluminum housing. With two power inputs, link down alarming, Link-Fault-Pass-Through and a wide range of fiber connectivity options, the EL8000 is the ideal media converter for environments where connectivity is crucial.

EtherWAN — "When Connectivity is Crucial."

Spotlight

Full Gigabit bandwidth and Jumbo frames

» 1000BASE-T and 1000BASE-SX/LX/BX/SFP Ethernet transmission conversion
» 1000Mbps Full duplex and full wire-speed forwarding rate
» Jumbo frames up to 10K bytes to increase throughput and transmission efficiency

Port Failure Alarm

» Relay alarm configured by DIP switch to notify users when power fails or link is down

Hardened Grade

» Supports -40 to 75°C (-40 to 167°F) operating temperature
» Redundant power inputs on terminal block connector
» Supports DIN-Rail mounting

Link-Fault-Pass-Through (LFPT)

» Provides constant monitoring of the links connected to the media converters
» If a copper or a fiber link fails, the media converter will pass the fail state on throughout the link, disabling the fiber link and the copper link on the opposite end

Specifications

Technology

Standards

  • • IEEE 802.3ab 1000BASE-T
  • • IEEE 802.3z 1000BASE-SX/1000BASE-LX

Forward and Filtering Rate
  • • 148,810pps for 1000Mbps

Processing Type
  • • Auto Negotiation
  • • Auto MDI/MDIX


Power

Input Voltage

  • • 12 to 48VDC

Power Consumption
Protection
  • • Overload current protection
  • • Reverse polarity protection


Mechanical

Casing

  • • Aluminum Case
  • • IP30

Dimensions
  • • 35.8 x 90 x 100mm (W x D x H)
      (1.41" x 3.54" x 3.94")

Weight
  • • 0.23Kg (0.51lbs.)

Installation
  • • DIN-Rail


Interface

Ethernet Port

  • • 1000BASE-T: 1 port
  • • 1000BASE-SX/LX/SFP: 1 port

LED Indicators
  • • Per Unit: Power 1, Power 2, Fault, LFPT
  • • Per Port: LNK/Activity

DIP Switch
  • • No.1: LFPT On/Off
  • • No.2: Alarm for copper port On/Off
  • • No.3: Alarm for fiber port On/Off
  • • No.4: Auto-negotiation for fiber port On/Off

Alarm Contact


Environment

Operating Temperature

  • • -40 to 75°C (-40 to 167°F)

Storage Temperature
  • • -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
  • • 5% to 95% (non-condensing)


Regulatory Approvals

ISO

  • • Manufactured in an ISO 9001 facility

Safety
  • UL 61010

EMI
  • FCC Part 15B Class A
  • VCCI Class A
  • EN 55032
  • EN 61000-3-2
  • EN 61000-3-3
  • EN 61000-6-3

EMS
  • EN 61000-6-2
    • • EN 61000-4-2 (ESD Standards)
    • • EN 61000-4-3 (Radiated RFI Standards)
    • • EN 61000-4-4 (Burst Standards)
    • • EN 61000-4-5 (Surge Standards)
    • • EN 61000-4-6 (Induced RFI Standards)
    • • EN 61000-4-8 (Magnetic Field Standards)

Environmental Test Compliance
  • IEC 60068-2-6 Fc (Vibration Resistance)
  • IEC 60068-2-27 Ea (Shock)
  • FED STD 101C Method 5007.1 (Free fall w/package)


Application

Dimensions

Ordering Info

Model

EL8000-X1E 1000BASE-TX to 1000BASE-SX/LX/BX/SFP Hardened Media Converter

Gigabit Fiber Options (X)

3 1000BASE-SX (SC) - 550m
4 1000BASE-SX (SC) - 2Km
5 1000BASE-SX (ST) - 550m
A 1000BASE-LX (SC) - 10Km
B 1000BASE-LX (SC) - 20Km
R 1000BASE-BX (SC) WDM -TX: 1310nm/RX: 1550nm-20Km
S 1000BASE-BX (SC) WDM -TX: 1550nm/RX: 1310nm-20Km
V 1000BASE SFP

* More Gigabit options are also available upon request.