Feature

Overview

If you already impressed by EtherWAN´s existing Ethernet Extenders, here is another one to keep the heat on. The new ED3011 is a point-to-point Ethernet Extender that efficiently extends 10/100 Ethernet up to 6.2km using existing straight 2-pair copper wire. The ED3011 will allow Ethernet connectivity in existing facilities without pulling extra cable. This is the perfect solution for factory floors running serial signals over Ethernet or commercial buildings where it´s not practical to pull new cables. The new ED3011 is designed for longer distance applications. The ED3011 rounds out Etherwan´s Ethernet extender line consisting of; ED3101/ED3141/ED3331/ED3341, all of which extend Ethernet hundreds of meters using existing infrastructure of copper pairs or coaxial cable.

ED3011 Series Managed SHDSL Ethernet Extender

• Operates transparent to higher layer protocols such as TCP/IP
• Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
• Ethernet Extender (RJ-48) Port: Symmetrical on the SHDSL
• Fixed Data Rate Selection from 192Kbps to 10752Kbps for two pairs copper wire
• Adaptive Multi Rate from 192Kbps to 4608 Kbps for 1-Pair SHDSL
• Adaptive Multi Rate from 384Kbps to 9216 Kbps for 2-Pair SHDSL
• Maximum Distance: 6.8 kilometers

ED3341 Series Hardened 10/100BASE-TX Ethernet Extender Over Coaxial Cable

• Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
• Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
• Ethernet Port: 10/100Mbps-Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
• Ethernet Extender Port: Symmetrical on the VDSL, High-speed full-duplex up to 85 Mbps communications link over existing coaxial cable
• Ten speeds with speed indicator LEDs on front panel of unit,
  Up to 85Mbps@about 200meters (656ft.)
  Down to 1Mbps@about 2,600meters (8,530ft.)
• -40°C to 75°C (-40°F to 167°F) operating temperature range
• Redundant power inputs with Terminal Block and DC Jack
• DIP switch to select Local or Remote side
• Hardened aluminum case
• Supports DIN-Rail, Panel, or Rack Mounting installation

ED3331 Series Industrial 10/100BASE-TX Ethernet Extender Over Coaxial Cable

• Operates transparent to higher layer protocols
• Ethernet Port: 10/100Mbps-Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
• Ethernet Extender Port: Symmetrical on the VDSL, High-speed full-duplex up to 85Mbps communications link over existing coaxial cable
• Supports DIP switch to select Local or Remote side
• Ten reference speeds supports,
  Up to 85 Mbps@about 200 meters (656ft.),
  Down to 1 Mbps@about 2600 meters (8,530ft.)
• -10°C to 60°C (14°F to 140°F) operating temperature range
• Hardened aluminum case
• Supports DIN-Rail, Wall Mounting installation
• Compatible with EMC1600 Media Converter Chassis