EX78000 Series
Hardened Managed 4 to 10-port 10/100BASE (8 x PoE) and 2-port Gigabit Ethernet Switch
PoE power budget up to 60W/port (Ultra PoE), total 240W
Dual firmware image support
Available with either copper, SC, ST, WDM or SFP interface
EtherWAN's EX78000 Series is a hardened DIN-rail mounted managed PoE Ethernet switch platform. Equipped with 8 10/100BASE-TX PoE ports along with 60W power and 2 gigabit fiber ports, the EX78000 Series provides flexibility, speed, and reliability for networks in urban infrastructure, transportation, security, and other areas where connectivity is crucial.
EtherWAN — "When Connectivity is Crucial."
Hardened-Grade for Non-Ventilated & Harsh Environments
- Wide operating temperature range -40 to 75°C (-40 to 167°F)
- Fanless operation
- High impact, thermal shock, and electrical noise resistance
PoE Features
- Up to 60W/port with 240W total power budget
- Long distance PoE up to 250m (820ft)
- PoE watchdog monitors status of connected PoE devices
Management/Security Features
- Port control
- 802.1x port-based network access control and remote authentication through RADIUS
- Configure and monitor with eVue™ and eLite™
Support
- Complimentary Technical Support
- Free Firmware Upgrades
- Limited Lifetime Warranty
Interface
- CLI, Telnet, Web Browser
- SNMP v1/v2c/v3
Management
- Firmware and configuration upgrade and backup via TFTP
- Supports DHCP Server/Client
- RMON (Remote Monitoring): group 1, 2, 3, 9
- Port Mirroring: TX/RX and both
- NTP (Network Time Protocol) synchronization
- IEEE 802.1ab LLDP (Link Layer Discovery Protocol)
- IPv4/IPv6
Security
- MAC Address Filtering
- Enable/Disable port
- Storm control (Broadcast and multicast types)
- IEEE 802.1x LAN Access control
- Remote authentication through RADIUS and TACACS+
- Multi-user login and privileged access management
- SSH for CLI and Telnet security
- SSL for web security
- System log (Remote/Local)
- ACL
Quality of Service (QoS)
- Priority Queues: 4 queues per port
- Traffic classification based on IEEE 802.1p CoS, DSCP, WRR and strict mode
- Rate Limiting (Ingress/Egress)
Layer 2 Features
- Auto-negotiation for port speed and duplex mode
- Flow Control
- IEEE 802.3x Full duplex mode
- Back-Pressure half duplex mode
- Redundant Protocols
- IEEE 802.1D STP
- IEEE 802.1w RSTP
- IEEE 802.1s MSTP
- EtherWAN's Alpha-Ring network fault recovery (<15ms)
- VLANs
- IEEE 802.1Q Tag VLANs (128 groups, 4096 VID)
- GVRP
- GMRP
- Link Aggregation
- Static Trunk (2 groups, support MAC base)
- IEEE 802.3ad LACP
- IGMP Snooping v1/v2/v3
Interface
- Ethernet
- 4 or 8 x 10/100BASE-T(X) (PoE)
- 0, 2 or 4 x 100BASE FX
- 2 x 100/1000BASE SFP Slot
- 2 x Gigabit
- Console
- 1 x DB9 RS-232
- Alarm Contact
- 1 x Relay output, current capacity 0.5A/48VDC
- LED Indicators
- Per Unit: Power 1, Power 2, Alarm
- Per Port: Link/Activity (Green)
- Per PoE Port: (Orange)
Technology
- Standards
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX/100BASE-FX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-SX/1000BASE-LX
- IEEE 802.3x Full duplex and flow control
- IEEE 802.1p QoS
- IEEE 802.1Q Tag VLANs
- IEEE 802.1w RSTP
- IEEE 802.1x PNAC
- IEEE 802.3af/at/bt Power over Ethernet
- Forward/Filtering Rate
- 14,880pps for 10Mbps
- 148,810pps for 100Mbps
- 1,488,100pps for 1000Mbps
- Packet Buffer Memory
- 12M bits
- Processing Type
- Store-and-Forward
- Auto-negotiation
- Half-duplex back-pressure and IEEE 802.3x Full-duplex flow control
- Auto MDI/MDIX
- Address Table Size
- 16K MAC Addresses
Power
- Input
- 52-57VDC Redundant (Terminal block)
- Power Consumption
- 10.4W Max (without PoE)
- Power Power Budget
- 240W Max.
- PoE Technology
- Alternative A & B
- Pins 1/2(+), 3/6(-), Pins 7/8(-), 4/5(+)
- Power Power Output
- Port 1 to 8 support PoE+ (15.4W/30W/60W)
- IEEE 802.3af: up to 15.4W/port, 47-57VDC
- IEEE 802.3at: up to 30W/port, 52-57VDC; 60W/port, 52-57VDC
- Protection
- Reverse Polarity Protection
Physical
- Casing Material
- Metal
- IP Rating
- IP30
- Dimensions
- 71.4 x 140 x 170mm (W x D x H)
2.85" x 5.6" x 6.8"
- 71.4 x 140 x 170mm (W x D x H)
- Weight
- 1.7kg (3.74lbs)
- Installation Type
- DIN-rail mounting
Environmental
- Operating Temp.
- -40 to 75°C (-40 to 167°F)
Tested @ -40 to 85°C (-40 to 185°F)
- -40 to 75°C (-40 to 167°F)
- Storage Temp.
- -45 to 85°C (-49 to 185°F)
- Relative Humidity
- 5% to 95% (non-condensing)
Regulatory
- ISO
- Manufactured in ISO-9001 facility
- EMI
- FCC Part 15B Class A
- VCCI Class A
- EN 61000-6-4
- EMS
- EN 61000-6-2
- EN 61000-4-2 (ESD)
- EN 61000-4-3 (Radiated RFI)
- EN 61000-4-4 (Burst)
- EN 61000-4-5 (Surge)
- EN 61000-4-6 (Induced RFI)
- EN 61000-4-8 (Magnetic Field)
- Safety
- UL 61010
- Vibration
- IEC 60068-2-6 Fc
- Shock
- IEC 60068-2-27 Ea
- Free Fall
- FED STD 101C Method 5007.1
- Industrial Compliance
- NEMA TS2
Warranty
- Length
- Limited Lifetime
- Details
What's Included
- Device
- Ethernet Switch
- Cables
- 1 Console Cable
- Documentation
- Quick Install Guide
Network Management | eVue™ Network Configuration and Monitoring Tool |
Network Discovery | eLite™ Network Discovery and IP Configuration Tool |
Model
EX78402-0YBT | 4-port 10/100BASE-TX PoE + 2-port Gigabit |
EX78802-0YBT | 8-port 10/100BASE-TX PoE + 2-port Gigabit |
EX78822-VVBT | 8-port 10/100BASE-TX PoE + 2-port 100BASE-SFP +2-port 100/1000BASE-SFP |
* DIN-Rail mounting kit included.
Gigabit Port Options (Y)
V | Support 2-port 100/1000BASE SFP (DDM) |
Accessories
Fiber Patch Cable | www.etherwan.com/us/products/fiber-patch-cable |
Hardened Gigabit SFP Module | www.etherwan.com/products/sfp-fiber-transceiver |
DIN-Rail Power Supplies | www.etherwan.com/products/din-rail-power-supply (*) |
*Recommended Power Supply | NDR-480-48 480W 48VDC DIN-Rail Power Supply |
EB-232 | Configuration Backup and Restoration Tool |